Wears better than SRAM OEM.
Works great!

High quality looks great and last forever. Only chain rings I use.

Sequence

Have ran these on my downhill bikes for a few years after having problems with other brands, it’s safe to say this has been perfect and problem free!

I have Sequence chainrings on all my bikes and have had zero issues. Good looking, locally made and cheaper than OEM. It's a great option!

Chainrings aren't exactly exciting but this is a quality piece of kit that stands up to abuse and looks good doing it. I've never dropped a chain with this chainring and don't run a chain device.

Just replaced a worn out from ring on the bike with a 30T and it works great!! Holds the chain without issue. I've been running these front rings for a while, always great quality and machining, and they wear well! Two thumbs up.

Bought this for my 2017 Trek Fuel ex9 with boost 3mm offset. Have loads of hills to climb and struggled a bit with existing 32 tooth. Worked like a charm, but wondering if I should have maybe gone for a 30 as hardly use big sprocket now at back which is 11-42 setup. Other than that would recommend.

Quality and finish are great. Too soon to tell how it will wear, but way cheaper than OE chain ring.

Bought 28 tooth to use on my 15 Spec Enduro Comp as I wanted to lower the overall gearing. The four spider arms on the crank
rub on the chain and would cause it to derail. Stock bolts no longer work also. Very disappointed and returned .

Holds the chain great right now. Only issue came with it not jiving well with my saint crankset. The saint cranks have tabs that are threaded and provide a very clean look, the chainring's holes were threaded so it works fine just doesn't have the clean finish i like on the saints.

Dear SRAM: please consider this 28T option as X-Sync has done for us middle-aged, 20%+ incline, 9,900 ft above sea level bikers!!!
;)

Since SRAM wont make anything under a 30T I used this. Works like a charm. Allows me to go as slow as I want.

Ok, so far so good. The Chromag Sequence X-Sync Chainring replaces a Chromag Clocker that kept dropping chains after a summer of single speed use. After 2 weeks of use i still have yet to drop a chain using the Sequence. Some of my test have included loads of stair rides, erratic shifting, and no dropped chains yet. I have not done any real off roading yet with the Sequence; so, I can not comment on that. My only issue has been some creaking since i installed it. I'm going to tighten down chain ring bolts down a bit further and see the outcome.

Needed a lower gear than my 30T could provide. The 28T works great. The chain actually sits a little lower than the spider arms, but the chainring is made to stand off the arms to allow the chain side plates to clear the spider arms. Also, the holes in the ring are threaded so you get rid of the backer bolt. I had to change out my SRAM bolts, which are slightly larger diameter than the standard chainring bolt.

The Good: Could go on for days... Great quality, unlimited size options, tons of colors if your into that, fits 9 and 10 speed chains, taller tooth profile to hold chain, and Machined in North America to top it off. Will never run anything else.. (please never stop making these Chromag!)

The Bad: ????????????????????????????????????

Overall Review:
Have one on all 4 bikes I own. Simple solid Chromag quality. Wish more dealers in California would carry their goods....